Chemical Resistant Grey Modular Laboratory Furniture With Large
Sink Cabinet And Desks
Green Modular Lab Design: Mostly About Air
When design a lab, we hope to make it environment friendly. Make it
Green and main point is AIR.
That, of course, will raise the first cost of the building. The
architects can also produce an analysis that will compare the
first-cost premium with the lifetime costs for maintenance and
replacements for higher first-cost and lower first-cost building
Such a cost comparison is the reason for planning at this level of
detail. It will produce a better building that will, over its
lifetime, save a great deal of money for the college or university.
Planning labs with a complete team of people who are connected to
the facility and its use enables designers to deliver a fully
|Worktops Compare||Epoxy Resin||Phenolic Resin||Stainless Steel||Edge Grain marble||High Pressure Laminate|
|areas of use||all||all||select||select||select|
Planning space for materials and consumables
Laboratories usually provide for the handling of materials and
consumables in one of two ways. Each research group would be
responsible for its own needs. Each would order, purchase, accept
delivery, store, and handle for itself. Then you could provide
separate storage areas for each of the individual research groups.
This can make for an inefficient use of space.
Then you could provide separate storage areas for each of the
individual research groups. This can make for an inefficient use of
The institution might decide to centralize some of the basic gases
and basic consumables and then charge a per diam or some kind of
storage rate to the research groups. With this plan, all the
purchasing, delivering, and storage could be centralized in the
building and make more efficient use of space.
On the downside, it might cost the institution a bit more because
additional personnel have to come on board to manage the central
purchasing and storage areas, but those costs can be factored into
per diam charges.
|Product Name||Modular Lab Furniture|
|Worktop Material||12.7mm Wilsonart Phenolic Resin|
|Frame Material||40*60mm steel tube|
|Cabinet Body Material||1.0mm cold rolled steel|
|Cabinet Inner Shlef Material||1.0mm cold rolled steel with epoxy resin coating|
|Lab Bench Loading||≥400kg per meter for lab side bench, ≥800kg per meter for lab
|Lab Cabinet Loading||≥90kg per pedestal cabinet for single storage cabinet, ≥40kg per
cabinet shelf for inner cabinet shelf|
|Reagent Shelf Loading||≥50kg per floor|
More pictures about Modular Laboratory Furniture